Factory Reconditioned Bosch 11224VSR-RT 7/8-in SDS-plus Bulldog Rotary Hammer
-
Factory Reconditioned
for $189.99
People who purchased this item also viewed...
- Variable speed 6.9 Amp motor , 0-1,100 RPM, 0-6,150 BPM
- SDS-plus bit system Tool-free bit changes with automatic bit locking, dust protection and maximum impact energy transfer rate
- Multi-function selector - 3 modes of operation, rotation only, rotary hammer and hammer only mode
- Variable-speed reversing trigger - For accurate bit starting, as well as removing fasteners or bound bits
- Vario-Lock positioning - Rotates and locks chisel into 36 different positions to optimize working angle
- D-handle design - For extra control, ideal for overhead and downward drilling applications
- 360 degree auxiliary handle with built-in depth gauge - Wide range of movement along with consistent drilling depth
- Integral clutch - Helps minimize torque reaction
- Double insulated, UL listed, complies to OSHA
- 7/8" SDS-plus Rotary Hammer - 11224VSR-RT
- Auxiliary Handle - 1 612 025 032
- Depth Gauge - 1 613 001 010
- Carrying Case - 2 610 999 952
| Amperage: | 6.9 |
| Impact Energy: | 1.6 ft-lbs. |
| RPM: | 0 - 1,100 |
| BPM: | 0 - 6,150 |
| Max. Capacity - Concrete: | 7/8-in |
| Max. Hole Diameter in Concrete-Thin Wall Core Bit: | 2-1/2-in |
| Steel Drilling: | 1/2-in |
| Length: | 17-1/2-in |
| Voltage: | 120V |
| Weight: | 6.5 lbs. |
| Chuck Type: | SDS-Plus |
| Corded: | Yes |
| Optimal Range: | 3/16-in - 5/8-in |
THIS LIMITED WARRANTY DOES NOT APPLY TO ACCESSORY ITEMS SUCH AS CIRCULAR SAW BLADES, DRILL BITS, ROUTER BITS, JIGSAW BLADES, SANDING BELTS, GRINDING WHEELS AND OTHER RELATED ITEMS.
ANY IMPLIED WARRANTIES SHALL BE LIMITED IN DURATION TO ONE YEAR FROM DATE OF PURCHASE. SOME STATES IN THE U.S., SOME CANADIAN PROVINCES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU.
IN NO EVENT SHALL SELLER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING BUT NOT LIMITED TO LIABILITY FOR LOSS OF PROFITS) ARISING FROM THE SALE OR USE OF THIS PRODUCT. SOME STATES IN THE U.S. AND SOME CANADIAN PROVINCES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU.
THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE IN THE U.S., PROVINCE TO PROVINCE IN CANADA AND FROM COUNTRY TO COUNTRY.
THIS LIMITED WARRANTY APPLIES ONLY TO PORTABLE AND BENCHTOP ELECTRIC TOOLS SOLD WITHIN THE UNITED STATES OF AMERICA, CANADA AND THE COMMONWEALTH OF PUERTO RICO. FOR WARRANTY COVERAGE WITHIN OTHER COUNTRIES, CONTACT YOUR LOCAL BOSCH DEALER OR IMPORTER.
Product Reviews
REVIEW SNAPSHOT®
by PowerReviewsPros
- Easy to use (6)
- Good power output (6)
- Good grip (5)
- Easy to store (4)
Cons
Best Uses
- Home repair (3)
- In the field (3)
- Reviewer Profile:
- Avid do-it-yourselfer (5)
REVIEWS
Reviewed by 27 customers
Sort by
Displaying reviews 1-10
Previous | Next »
Pros
- Easy To Store
- Easy To Use
- Good Grip
- Good Safety Features
- Powerful
Cons
Best Uses
- Home Repair
- In The Field
Comments about Bosch 7/8-in SDS-plus Bulldog Rotary Hammer:
I've used it to drill about 2 dozen pilot holes for tapcon screws into concrete. I wish I would have had one of these when I was working. It makes the 18 volt yellow hammer drill look like a cracked egg. But then it is twice as big.
I like the fact it has 3 settings: drill only, hammer+drill or hammer only.
Pros
- Easy to control
- Low vibration
Cons
Best Uses
- Excess Mortar Removal
- Tile Removal
Comments about Bosch 7/8-in SDS-plus Bulldog Rotary Hammer:
So far I've used this for everything but drilling.
While refinishing a basement I used it to remove ancient mortar squish-out from the top of the foundation. Doing this by hand would have taken hours. Using the Bosch it took about 15 minutes and didn't leave any gouges in the block wall foundation.
Using a tile chisel I've also scraped thinset remnants, tile bits, and other miscellaneous hardened junk from a concrete floor. Again, the job took minutes and didn't damage the underlying concrete substrate.
In use it transfers little of its vibration to the users hands. The trigger controls a wide range of hammering from slight pick-pick-pick to total masonry annihilation (though I don't believe those terms are used in the manual).
Although this is on the small end of Bosch's SDS line it's more than enough for residential class jobs. If you need to reduce bolders to gravel you'll want something larger.
Like every reconditioned tool I've purchased this was pristine out of the box.
Pros
- Easy To Use
- Good Grip
- Powerful
Cons
- None
Best Uses
- In The Field
Comments about Bosch 7/8-in SDS-plus Bulldog Rotary Hammer:
The bit loading is simple, fast and stays locked in during use. The hammer drill function works much faster than the tool other people were using and soon the Bosch was the only one in use.
Pros
- Easy To Use
- Good Grip
- Powerful
Cons
Best Uses
- Home Repair
Comments about Bosch 7/8-in SDS-plus Bulldog Rotary Hammer:
A powerful time saver.
Pros
- Easy To Store
- Easy To Use
- Powerful
Cons
Best Uses
- Home Repair
Comments about Bosch 7/8-in SDS-plus Bulldog Rotary Hammer:
Look guys and gals . If you need a hammer drill,buy this one . You'll be happy you did . Be sure to add
Bosch HCK005 SDS-plus S4 Hammer Carbide 5-piece Set.
Their shipping is fast .
Pros
- Easy To Store
- Easy To Use
- Good Grip
- Powerful
Cons
Best Uses
- In The Field
Comments about Bosch 7/8-in SDS-plus Bulldog Rotary Hammer:
This is a very handy drill/Hammer drill
Pros
- Easy To Store
- Easy To Use
- Good Grip
- Powerful
Cons
Best Uses
- In The Workshop
Comments about Bosch 7/8-in SDS-plus Bulldog Rotary Hammer:
Use mostly for drilling concrete anchors and holes in beams.
Comments about Bosch 7/8-in SDS-plus Bulldog Rotary Hammer:
these drills are great. use them on the job.
Comments about Bosch 7/8-in SDS-plus Bulldog Rotary Hammer:
Professional Handyman
Just a soildily built tool as are all Bosch products
Nothing I have bad to say
Pros
- Light and powerful
Cons
Best Uses
- Hammer drill-chisel
Comments about Bosch 7/8-in SDS-plus Bulldog Rotary Hammer:
Just the right power and weight to conveniently handle a wide variety of jobs.
Displaying reviews 1-10
Previous | Next »
What's the difference between New and Factory-Reconditioned?
Reconditioned items are returns to major retailers that have been inspected by factory-trained technicians to ensure that they operate like new.- Factory-Reconditioned items offer significant savings vs. new. Minor cosmetic blemishes or scratches that do not affect item performance may be present.
- Factory-Reconditioned items may not come with all of the consumables the new version comes with (bits, sanding pads/papers, cases, etc.).
- Both come with manufacturer warranty and are covered by CPO’s 30 Day Money Back Guarantee.
 |
 |
|
| Condition: | New | Factory Reconditioned |
| Features: | Same | Same |
| Specs: | Same | Same |
| Includes: | 7/8" SDS-plus Rotary Hammer - 11224VSR, Auxiliary Handle - 1 612 025 032, Depth Gauge - 1 613 001 010, Carrying Case - 2 610 999 952 |
7/8" SDS-plus Rotary Hammer - 11224VSR-RT, Auxiliary Handle - 1 612 025 032, Depth Gauge - 1 613 001 010, Carrying Case - 2 610 999 952 |
| Availability: | In Stock | In Stock |
| Warranty: | 1 year Bosch | 1 year Bosch |
| Price: | $189.99 | $129.99 |
| You Save: | N/A | $60.00 (32%) |
