Factory Reconditioned Bosch 5412L-RT 12-in Dual-Bevel Slide Miter Saw with Upfront Controls and Laser Tracking
-
Factory Reconditioned
for $699.99
People who purchased this item also viewed...
- 15 Amps, 3,800 RPM, 3 HP
- Upfront bevel lock lever and range selector knob - Easily-accessed controls for quick and accurate bevel settings
- Multi-position main handle - Easily locks into any of four positions for optimum comfort and control
- Large 25-1/2" base with built-in cast sliding extensions for 40" total length - Provides extra support for longer materials
- Tall 4-1/2" speed-track sliding fences - For easy bevel set-ups and increased crown molding cutting capacities
- Built-in length stop - For repetitive cuts of the same length
- Easily readable bevel and miter scales - For easy setting of accurate bevel and miter angles
- Exclusive wedge-and-slot miter detent system - Consistent and precise miter angles over the life of the tool
- Crown miter settings - 31.6 degree miter and 33.9 degree bevel detents for quick, accurate crown cuts
- Miter detent override - For easy, precise setting of any neighboring angle
- Electric brake - For quick, repetitive cuts; stops blade in seconds
- Dual rail design - For superior accuracy
- Spindle lock - For fast, easy blade changes
- Arbor mounted laser tracking - Provides accurate laser lines for precision cutting
- Heavy item - additional shipping charges apply.
- 12" Dual-Bevel Slide Miter Saw w/ Upfront Controls and Laser Tracking - 5412L-RT
- Wrench Set
- Tool-Free Vertical Work Clamp - MS1226
- Dust Bag - MS1225
| Amperage: | 15 |
| RPM: | 3,800 |
| Blade Diameter: | 12-in |
| Arbor Size: | 1-in |
| Weight: | 59 lbs. |
| Slide: | Dual Rail |
| Bevel: | Dual |
| Laser Guide: | Yes |
| Light: | No |
| Voltage: | 120V |
| Handle: | Multi-Position |
| Positive Miter Detents: | 10 |
| Cord: | Double Insulated |
| Max. Miter Angle Left: | 52 Degrees |
| Max. Miter Angle Right: | 60 Degrees |
| Max. Bevel Angle Left: | 47 Degrees |
| Max. Bevel Angle Right: | 47 Degrees |
| Dimensions: | 25-1/2-in - 40-in x 20-in (LxWxH) |
| At 0 Miter / 0 Bevel: | 4-1/2-in x 12-in |
| At 0 Miter / 45 Bevel Left: | 2-3/4-in x 12-1/2-in |
| At 0 Miter / 45 Bevel Right: | 1-3/4-in x 12-1/2-in |
| At 45 Miter Left / 0 Bevel: | 4-1/4-in x 8-3/4-in |
| At 45 Miter / 45 Bevel Left: | 2-3/4-in x 8-3/4-in |
| At 45 Miter Left / 45 Bevel Right: | 2-5/8-in x 8-3/4-in |
| Crown Molding - Base Against Fence: | 6-in |
| Base Molding - Against Fence: | 4-1/4-in |
| Crown Molding - Laying Flat: | 10-1/4-in |
| Base Molding - Laying Flat: | 12-in |
| Horsepower: | 3 |
THIS LIMITED WARRANTY DOES NOT APPLY TO ACCESSORY ITEMS SUCH AS CIRCULAR SAW BLADES, DRILL BITS, ROUTER BITS, JIGSAW BLADES, SANDING BELTS, GRINDING WHEELS AND OTHER RELATED ITEMS.
ANY IMPLIED WARRANTIES SHALL BE LIMITED IN DURATION TO ONE YEAR FROM DATE OF PURCHASE. SOME STATES IN THE U.S., SOME CANADIAN PROVINCES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU.
IN NO EVENT SHALL SELLER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING BUT NOT LIMITED TO LIABILITY FOR LOSS OF PROFITS) ARISING FROM THE SALE OR USE OF THIS PRODUCT. SOME STATES IN THE U.S. AND SOME CANADIAN PROVINCES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU.
THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE IN THE U.S., PROVINCE TO PROVINCE IN CANADA AND FROM COUNTRY TO COUNTRY.
THIS LIMITED WARRANTY APPLIES ONLY TO PORTABLE AND BENCHTOP ELECTRIC TOOLS SOLD WITHIN THE UNITED STATES OF AMERICA, CANADA AND THE COMMONWEALTH OF PUERTO RICO. FOR WARRANTY COVERAGE WITHIN OTHER COUNTRIES, CONTACT YOUR LOCAL BOSCH DEALER OR IMPORTER.
Product Reviews
REVIEW SNAPSHOT®
by PowerReviewsPros
- Easy to use (9)
- Good design (8)
- Good power output (8)
- Great blade (6)
- Safe (6)
Cons
Best Uses
- In the workshop (8)
- Home improvement (6)
- In the field (5)
- Reviewer Profile:
- Avid do-it-yourselfer (5), Professional (3)
Reviewed by 9 customers
Sort by
Displaying reviews 1-9
Pros
- Easy To Use
- Good Design
- Great Blade
- Powerful
- Safe
Cons
Best Uses
- In The Workshop
Comments about Bosch 12-in Dual-Bevel Slide Miter Saw with Upfront Controls and Laser Tracking:
I enjoyed using this saw. I hada different miter saw and thought it was good, this saw is very nice to use.
Pros
- Easy To Use
- Good Design
- Great Blade
- Powerful
- Safe
Cons
Best Uses
- Home Improvement
- In The Workshop
Comments about Bosch 12-in Dual-Bevel Slide Miter Saw with Upfront Controls and Laser Tracking:
The accuracy of the miters is very impressive
Pros
- Easy To Use
- Good Design
- Great Blade
- Powerful
- Safe
Cons
- Poor Dust Collection
Best Uses
- Home Improvement
- In The Field
- In The Workshop
Comments about Bosch 12-in Dual-Bevel Slide Miter Saw with Upfront Controls and Laser Tracking:
The dust collection system using the cloth bag does a poor job collecting sawdust. Connecting a shop vacuum or a shop dust collector helps improve this function, especially when cutting wood in the workshop. When working outdoors this isn't such a big deal. We reversed the blade to cut aluminum soffit, fascia, and vinyl siding when we redone my son's home. It worked great, and we were very happy with the results. Thanks for making a great saw.
Pros
- Easy To Use
- Good Design
- Great Blade
- Powerful
- Safe
Cons
Best Uses
- Home Improvement
- In The Field
- In The Workshop
Comments about Bosch 12-in Dual-Bevel Slide Miter Saw with Upfront Controls and Laser Tracking:
Interior Molding & Building a free standing deck 12 X 30 using Trex building material
Pros
- Easy To Use
- Good Design
- Powerful
Cons
Best Uses
- Home Improvement
- In The Workshop
Comments about Bosch 12-in Dual-Bevel Slide Miter Saw with Upfront Controls and Laser Tracking:
This is a powerful, versatile, well-designed saw. To get the most from it, read the manual before you use it, and follow the set-up instructions. The major advantage vs. similar saws from Makita, Hitachi etc. is that the lever for releasing the bevel is up front on the same handle as the release for the miter angle. The levers and controls feel very solid and they're straightforward to use. (Ridgid makes a 12" saw with similar controls.) The Bosch comes with an arbor laser that some people will like and some won't. It puts a thin red line just to the left of a .4 mm pencil line. To save on battery power, it doesn't come on until the saw is running and you don't see it on the board until you've pulled the saw down almost to where it starts to cut. If you don't like it, take it off. The handle can be set to any of four positions including two that will make lefthanders happy. The blade slides easily on parallel bars and it's nicely spring loaded so it's not too hard to pull it down and not too easy. It feels well balanced to me, and I'm short, 140 pounds and over 60. There's no side-to-side deflection even when it's fully extended. It comes with a pretty good 60-tooth ATB crosscut Bosch blade that's OK for framing, but you probably should buy a good 80-tooth or 96-tooth blade for finish work or fine carpentry. Remember you need a blade with a 1" arbor. The saw also comes with an absolutely useless dust collection bag. Dust collection from a miter saw is difficult anyway, but the bag Bosch supplies is made of a coarsely woven burlap-like material that's so porous that the little sawdust it does collect blows through the fabric. Connecting a vacuum to the port on the back helps reduce the amount of sawdust in the air. A 12" saw is a step up from a 10" in terms of the height it can cut, but that blade is *big*. Despite the guard, the back 2/3rds of the running blade is exposed as you pull it forward on the sliders and then pull it down, so you really have to be aware of where your arm is – not just your fingers. The saw has two well-placed handles that help you pick it up properly, but it's heavy and big. Moving it is awkward. I leave my saw in my workshop on a rolling cart. But if you're planning to haul it around to jobsites, consider getting a collapsible rolling miter saw stand – maybe a Delta 36-136. That way it's less likely to be knocked out of adjustment when it's being transported. The "reconditioned" saw arrived in perfect condition and I need only one adjustment to set it up. The arbor laser did not work and I emailed Bosch, which replaced it promptly without any questions. [...] I'm happy to recommend the reconditioned Bosch saw and CPO.
Pros
- Easy To Use
- Good Design
- Great Blade
- Powerful
- Safe
Cons
Best Uses
- Home Improvement
- In The Field
- In The Workshop
Comments about Bosch 12-in Dual-Bevel Slide Miter Saw with Upfront Controls and Laser Tracking:
I can't say anything bad about it,yet.
Pros
- Easy To Use
Cons
Best Uses
- In The Workshop
Comments about Bosch 12-in Dual-Bevel Slide Miter Saw with Upfront Controls and Laser Tracking:
A little more care in releasing would be good, I fixed the 'non detent' great tool. [...] could ask for very little more.
Pros
- Awesome
- Easy To Use
- Good Design
- Great Blade
- Powerful
- Safe
Cons
Best Uses
- Home Improvement
- In The Field
Comments about Bosch 12-in Dual-Bevel Slide Miter Saw with Upfront Controls and Laser Tracking:
Awesome,there is no other word that I can describe
Pros
- Easy To Use
- Good Design
- Powerful
Cons
Best Uses
- In The Field
- In The Workshop
Comments about Bosch 12-in Dual-Bevel Slide Miter Saw with Upfront Controls and Laser Tracking:
Bosch is one of the best tool designers & this saw lives up to there other tool design in function & for thought. Next time I would purchase the 10" for a lower price point & light weight.
Displaying reviews 1-9
What's the difference between New and Factory-Reconditioned?
Reconditioned items are returns to major retailers that have been inspected by factory-trained technicians to ensure that they operate like new.- Factory-Reconditioned items offer significant savings vs. new. Minor cosmetic blemishes or scratches that do not affect item performance may be present.
- Factory-Reconditioned items may not come with all of the consumables the new version comes with (bits, sanding pads/papers, cases, etc.).
- Both come with manufacturer warranty and are covered by CPO’s 30 Day Money Back Guarantee.
 |
 |
|
| Condition: | New | Factory Reconditioned |
| Features: | Same | Same |
| Specs: | Same | Same |
| Includes: | 12" Dual-Bevel Slide Miter Saw w/ Upfront Controls and Laser Tracking - 5412L, Premium 60-Tooth Thin-Kerf Carbide-Tipped Blade, Wrench Set, Tool-Free Vertical Work Clamp - MS1226, Dust Bag - MS1225 |
12" Dual-Bevel Slide Miter Saw w/ Upfront Controls and Laser Tracking - 5412L-RT, Wrench Set, Tool-Free Vertical Work Clamp - MS1226, Dust Bag - MS1225 |
| Availability: | Out of Stock | In Stock |
| Warranty: | 1 year Bosch | 1 year Bosch |
| Price: | $699.99 | $579.99 |
| You Save: | N/A | $120.00 (17%) |
